[glaufman]

BTW, I need a gut check on something... when I did the cal for the sound card, I included the Eurorack in the loop... sound card output went to input on the mixer, with the mixer's output going back to the sound card's input... I left the phantom power off on the mixer as I was not using the mike.... anything inherently wrong with this?
One other thing, rather than use the same cable with an adapter, I used similar but different cables, i.e., when doing the cal I took a mini to phono cable from the card to the mixer, but when taking the scan I used a mini to RCA cable, same both production made, both Y type (splitting the tip/ring) ,and both the same manufacturer... any issues, other than the RCA cable was abit longer than the phono cable?