Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - first graph...?
Thread: first graph...?
View Single Post
Old 02-24-08, 05:08 PM   #14 (Link)
 
hasse_swe
Shackster
Alias: hasse_swe
Loc: Sweden
User: #15149
Since: Jan 2008
Posts: 44
hasse_swe is offline
Re: first graph...?


Quote:
Wayne A. Pflughaupt wrote: View Post


Well, if you decrease everything across the board to where the 20 Hz area is, you’ll have to boost the volume back up to make up for the huge loss in sound level. That will have the same effect as if you had just boosted the below-20 Hz. Might not be a good idea to try to boost up that low range by any method. Regards,
Wayne
hi!
back at this side of forum a while now... (been playing with the fbq )

i was thinking a little about that first graph i posted (first post)....
and about boosting...

as my setup is now.. the sub is running at idle (i can imagine)
the sub's volume is at position 1 out of 100!
so whats you opninion in that case?

raise the sub volume to atleast 1/3 of possible (that will certanly bring up the low freq-loss that is in graph approx 20-27hz... and then bring down the rest a huge (10-20db)amount probably...
or stick with 1/100 volume setting and just boost 20-27 range?
or?
thanks/Hasse


Forum Rules Reply With Quote