Hi all,
This is my first try at using REW. Very cool program! Not sure if I'm setting every thing up right and would like some opinions if you don't mind. I'll post some graphs and add some comments at the end.
Sub only in front left corner of room(this corner has opening to foyer and hallway)
Sub and mains left front corner
Sub and mains right front corner
Levels on the sub just seem low to me, especially in the left corner. It's a lot smoother there than the right corner. When I try and turn it up I get the clipping detected warning. My system is Onkyo 505, Cadence CSX-12 (
http://www.cadencestore.com/ProductC...&idproduct=396 ) with Beta 20's and a C360 up front and a pair of Athena Bipole surrounds. This is all in a fairly large room, Main listening area is 18 by 18 with cathedral cealing with an attached 10 by 12 open sitting area. Really doesn't sound bad at all but this is used for 98% HT and I would really like more low end umph if you know what I mean.
I realize I have a pretty wimpy sub and may just have to delegate it to bedroom duty and upgrade if I can't get any more than this out of it. Does it appear that I have the program working properly? Thinking about doing a DIY sub anyway. Anyway all comments are welcome.
Thanks,
James