Quote:
drdoan wrote:
 Jason, welcome to the Shack. With the info you have provided, it sounds like you could hook up the sub-out (LFE out) from the Cambridge using a "y" connector to the right and left inputs of the sub amp. Dennis |
Thanks for the welcome and your ideas, Dennis! Your approach makes the issue seem much less complicated than I thought. I think I have provided the correct information. In researching the topic, there was so much information on line-level and speaker-level connections for subs that my eyes glazed over.
Using a Y connector should allow the receiver to do all the work: cross-over point, etc. I'll try it.
The only thing the amp has on it is a gain control: a dial which goes from 0 to 18dB.