Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - True HD receiver needed?
View Single Post
Old 02-29-08, 12:19 PM   #6 (Link)
 
bobgpsr
Tech'y Shackster
Platinum Supporter
Alias: Bob
Loc: Shueyville, Iowa
User: #25
Since: Apr 2006
Posts: 951
bobgpsr is offline
Re: True HD receiver needed?


Quote:
tonyvdb wrote: View Post
I dont know what quality the DA's are in the PS3 but its usually better to have the receiver do the decoding. The Onkyo 705 is defiantly a good choice.
The Onkyo needs raw bitstream audio sent to it for it to decode. The PS3 does not output raw bitstream. Besides the D/A convertors are used in the receiver anyway if it gets decoded multichannel linear PCM input. The PS3 will send TrueHD decoded to lossless LPCM on to a receiver that can accept audio input via HDMI. Any version of HDMI (1.1, 1.2 or 1.3).

The player's audio D/A convertors come into the playback process when you use the player's audio analog outputs (stereo, 5.1 or 7.1) to the stereo or multichannel analog inputs of the receiver (AVR/Pre-Pro) being used.


Forum Rules Reply With Quote