Hi,
I have a BFD and i am only just getting my head around this.
I am ussing REW with radio shack spl meter as mic have taken readings and at the moment just adjusting 2 to 3 peaks, I am using filters 17, 18, 19 and 20 which are all adjustable.
When I set to run and start playing films or music the BFD starts applying more filters at 1, 2, 3 and so on.
Am i doing some thing wrong, can i switch off the auto EQ filters.
As a side note REW found 4 peaks and i put everyone of those into the BFD, but the play back volume was so low and lost a lot of impact, Yes i did turn up the gain on the subs but how can you check the differance with and without EQ if you have to turn up the volume on subs so much.
If I sound dumb then accept my apology....
