Quote:
|
I have set the sub channel level in the AVR to +10 db and the BFD in bypass mode does not go to the yellow LED.
|
That's fine. The output levels of many receivers aren't that high, so this is expected.
It's really quite good. You don't need to get it much better than that. You'd find that if you moved the mic a few feet away, it would change at least by as much as the plus minus swing you have now, so it's fine. There's no large resonance peaks left and the only small problem is a dip at ~35Hz. You may be able to move your sub a bit and help that dip.
I guess the next thing is to add the mains and check the integration at the crossover. That's when the phase has an effect. It can be used to smooth that transition area.
brucek