[jagman]

It was set to subs but I hadn't pulled the wires from the mains. I realized that last night but it was late and I just wanted to get a couple readings before going to bed. The crossover within the AVR and REW are set to 80Hz. As you can see I have a massive null at 44Hz. I have the gain all the way up on the Samson S700. This way I don't have to boost frequencies with the BFD (except for the small amount in the mid 40's). I specifically chose to have the output calibrated to a little above the Target curve (that's my house curve). I like to have the lower bass around 5-10dB hot. I didn't get a chance to listen last night as it was a bit late, but I'll fine tune it to taste over the weekend. REW is a marvelous tool.