Quote:
Prof. wrote:
 You can fill a 2.35:1 screen by just zooming the lens on the projector...But you will have to change the zoom and the focus and the positioning for all the other aspect ratio's..
One of the advantages of the anamorphic lens with a constant image height screen is that you don't have to change any of these settings for most AR's..
The 2.35:1 image fills the screen, and the other AR's remain at the same height, with black bars at the sides..
But the main advantage is that you are getting full pixel mapping with the 2.35:1 image, unlike the zooming method..
I hope that helps to clear things up for you.. |
OK see if I understand this I can build a screen specifically for athe 2:35:1 image and use my Zoom to fill up the screen vertically but I'll lose a little picture on the width?