Quote:
|
Does the loopback "calibration" have any Left/Right channel difference adjustments?
|
hehehe, funny you should ask. John and I discussed this very point, and in the next version, this will automatically be taken care of (with an AGC type of adjustment of the left channel).
You're point is well taken. If you have a mic preamp with level adjust (as you do and anyone with an ECM and peramp would have), there's no problem because you can balance the right channel input against the looped back left channel calibrate input signal. If you have a fixed level meter (such as the RS meter or Galaxy), you wouldn't have this level capability.
The left channel calibrate can tolerate more of a swing than the right channel, by its nature it will have minimal noise to deal with. I would be careful not to clip it though. Simply set the input level using the left channel and then use your preamp adjust to balance them.
In the case of a RS meter or Galaxy, you could indeed use the Windows Master volume balance control if you got into trouble.
brucek