| REW Not communicating with BFD1124P
When I send the filter settings via REW I get no flashing store button and no filters (red led's on front of unit) showing stored. Also, how does one retreive filter settings from the BFD - the option is grayed out in REW (I have the midi-in connected to the BFD midi out)
This is what I've done to this point:
1) Read-read-read forum posts
2) Verified I've version 1.4 (I purchased this unit last week) by powering up with FilterSelect held down
3) Purchased the M-audio UNO midi interfaced and installed it with Windows XP Pro
3) Carefully followed the steps in the help files - verfied comms in REW Settings is active(shows M-audio UNO as an option)
4) Verified M-audio midi out to BFD midi in and matched step-for-step REW help files setting up the BFD for midi. The BFD parameters match the help file/pictures step-by-step
5) Made sure Store Enabled was triggered on
6) took a quick measurement
7) Find Peaks/Assign Filters/Optimise PK filters
8) Attempt to send filters to BFD preset 4
Again, I see no lights of any kind on the BFD and REW does not complain anything is wrong. I verified no filters sent by manually looking at filter #'s 1-4 in preset 4 and it shows nothing.
Any ideas?
|