| Re: REW V4.10 release
Hi John,
Thank you for sharing your knowledge with us by this program.
I did notice that in the measurement window when selecting Check Levels the SPL control shows 74-76db with a sweep level of -12 but the program comes back with a "Level to High" If I select check levels 2 or 3 times in a row (not changing anything on my AV unit, mic preamp or sweep level) it then comes back with Level OK.
After brucek's info on the system delay / speakers distance under the RTA post I tried this cool feature however it comes back to equal a distance of 18.08 feet. Actual distance from the front of the speaker to mic is 10ft 1 inch. Only 1 front speaker is being measured with all the other speakers and subwoofer disconnected in my example.
I'm sure in both cases it's something I'm doing wrong either by operation or setup?
|