Quote:
m-fine wrote:
To do SS with the software, got to the x-over tab (4th one in 2/3 of the way down the display). Select the output you want along the top right edge. For HP filter select But 48, frequency 20. For LP filter select Off. The settings will be the same on the LCD display but navigation is a bit clunkier.
|
I'm currently in the process of setting up a DCX, replacing my BFD. I've actually had to set a low pass setting, (above the high pass) due to way too much full range signal being passed by the LFE output of my HT receiver. My original HSU sub amp must have had low pass filtering in it, now I'm using a Mackie pro amp.