Hi all,
What a great forum!!! And even greater people!!
Thanks guys for helping all of us in getting there where perfect is very close.
Ok...Here is what I got.
MOTU 828MkII firewire interface, bought few days ago.
If anybody has any experience with 828...would me nice.
MOTU-828MkII..jpg
Back...8 ins, 8 outs 1/4", main stereo out (main stereo out volume control on front)
2 Mic/guitar instrument sends, ADAT, SPDIF, MIDI
front...2 mic/inst ins with pres. (two gain controls)
Motu_cuemix.jpg
This is Motu CueMix mixer.
JBL LSR3428 Monitors
Level meters are in dBFS. Specs are available online.
LSR.jpg
After that comes LA-610 and Chameleon Labs 7622.
RS 33-2055.
I need to make alignment of studio audio levels. A full calibration.
What is the right way of doing all connections?
What inputs and outputs on MOTU....
in 1&2 on the back to out 1&2 on the back or main out
in 1&2 on front with pres to out 1&2 on the back or main out
I need to know cause I guess I'll have to set ins and outs in REW and CueMix and in Windows Audio setup. It's a bit confusing.
Any help would be very nice!