I actually took the plunge on the 4CF cabinet.
I bought the wood and made all the cuts except the one for the amp.. not sure what I'll end up with.
10 Left!
I better call and order one of the C12.2's today then
So far it's looking like It'll be a pretty easy build. Just need to assemble the panels and even up some of the cuts that were a little too big because the Saw they had at Lowes was only accurate to 1/8" an inch... planning on belting the baffles and braces all together and evening them up with the belt sander.
anyway We'll see how it turns out. I plan on getting pics of the whole process.
Okay ordered a C12.2!!
Now to decide if I want a Dayton 240W, a Bash 300W or an Apex Sr with 350W..... The thread says it can handle between 250 and 350 Watts..
any reason why I shouldn't get a 350W Amp? Like maybe leaving a safety margin to prevent over powering the woofer? I'm not sure that's even possible or if thats something I'd have to worry about ABOVE 350W..
I'm planning on assembling the box this weekend so having the dimensions of the Amp would be helpful so I can make the cut in the back panel before I assemble it.