Quote:
hasse_swe wrote:
 why it's necessary to use combined curves instead of simply use house curve and nothing else?....  |
End result what you are after is that sub + mains should follow your "hard knee house curve". So when setting just a sub it has to follow sub low pass filter + hard knee and there target line can't be straight. It has to have some bending. Once you get your sub to follow this "not so straight line" and you connect your mains (that will follow high pass filter also not so straight line) the combined result will be straight hard knee curve, just what you wanted.
Repeat; sub alone won't produce straight looking line. Same goes to mains also. But when both are enabled math miracle happens and you get your straight hard knee curve.
