| Re: WD52525
There is no continuity in these lamps and no practical way to test them other than in a working set. On this model it is not uncommon for the connector to get pushed out of the back of the lamp housing when you put the lamp in. The clip that holds it in will bend and the connector will pop out if the lamp hangs up on the connector and does not go in smoothly. You have to take the back off of the set to get to it in order to put it back together if this is what has happened.
Another problem common in these sets are a couple of bad caps in the power supply that may give this symptom.
______________________
Why I support scouting...
Core values taught in Cub Scouts:
Citizenship, Compassion, Cooperation, Courage, Faith, Health and Fitness, Honesty, Perseverance,
Positive attitude, Resourcefulness, Respect, Responsibility. |