Quote:
The graph showed (sub only, axis and target line set with 1/3 smoothing per Wayne's recomendation) reports no peaks found when I select the find peaks option.
Can this be correct?
|
1- Set the vertical axis to 45dB-105dB.
2- Turn off smoothing. Never use smoothing on low frequency measurements. Filters optimised against a smoothed response will have settings that don't accurately match the room's modes.
3 - Set your target to 75dB.
4- Find Peaks............. you'll be happy.
It's not a big secret that Wayne and I disagree on this subject.
brucek