Bruce
The only selection that i can access are:
back line in/mic front, realtek HD rear output, line in front green, line in front pink, microphone
that's it
when i boot the computer i can hear the starting sound in the right front speaker wave in is not mute but as soon as i select the input and output and try to set the measurement level, i get the error that wave control is not found for the selected output and when i check the card properties the wizard has mute the wave , unmuting it does not solve the problem at all as no sound is coming out
it is as if REW is detecting all my input and output but not the card by itself
Quote:
| brucek wrote:
It seems to be recognizing your card, although I don't know what other possible selections are available in the SELECT DEVICE pulldown and I see the WAVE is greyed out. Note in mine it is not.
Attached is an example of my own RealTek card. You can clearly see it selected as RealTek AC97 Audio.
What are the possible selections for you in this area. I don't recognize the INPUT selection. It says Back line-in/Mic front? Attachment 523 Attachment 524
Do you have WAVE un-muted in the mixer?
Can you use Windows Media player for example? to ensure that the wave codecs are loaded... Attachment 525
brucek |