| basic question on setup
This is a fairly basic question on set up but any answer or direction to the right thread would be appreciated.
I am about to begin to build out may home theater room and had several questions.
1. I am likely getting a 58 in Panasonic plasma with 2 HDMI inputs. I will be using a high end Yamaha reciever and would like to know...
Don't most of the components connect through the reciever and then to the
plasma so that one or two HDMI slots should be enough on the TV?
( I intend to have a Blu Ray DVD, Xbox 360, HD Tivo and Time warner HD cable )
2. I will have the components in cabnets along the wall under and near the plasma (mounted on the
wall.
If I want to see few cables do they make electrical boxes that can accomidate all
the different wires going into one spot and coming out at one spot behind the TV?
Kind of like those plates that have a cable phone and ethernet outupt in one box.
3. I assume many of you have also hooked up a computer to the plasma and wanted to use the other
HDMI input on the TV for that.
I appreciate all the help and if you know of any examples of the wireing schematics for the various options on the forum I would really appreciate it. Eric in Austin
|