| Re: Magnet Brace - Touch or No Touch
again...from my car audio background... I helped a buddy build a wall for a couple of 18's. We made a brace from birch ply wood. We made it about 1" wider than the magnet structure and made it to the height of the center of the magnets. We then routered a curve that it would sit into. We used a strip of window foam seal to keep it from scratching if it did happen to move at all...and then braced the support to the enclosure.
I don't think you really need to worry about it vibrating...because all the rest of the enclosure vibrates inside there.
|