Quote:
|
Can any one help me with this and have i got it all wrong.
|
I'm not able to understand what the question is?
If you're using the ECM8000 microphone, then save
this cal file in any directory in your PC.
Then run REW and go to the SETTINGS page under the Mic/Meter Tab and click Browse and point to the newecm.cal file you saved in the directory fore-mentioned.
You'll then see that file is set in the Calibration File window. That's it, it will remain there forever until you clear it.
Your done with that...........
If you use an ECM8000 microphone, the Radio Shack meter is only used handheld near the ECM8000 at the listening area to generally setup 75dB. You use the Radio Shacks own meter readout to read this and then you put that meter away - no cal files.
brucek