| Re: Best advice integrating receiver's "room eq" with BFD
The Audyssey EQ found in today's receivers and pre-pros is aimed at correction to match the response curve of movie content. That is: Flat from 20 Hz to 10 kHz. Then a slight rolloff (-2 dB at 10 kHz down to -6 dB at 20 kHz).
I would expect that rolloff to be difficult to achieve with room treatment alone.
Pioneer and Yamaha have different EQ solutions with likely different target curves. In Pioneer's MCACC's case, I believe the EQ stops below 63Hz anyway.
|