Quote:
Wayne A. Pflughaupt wrote:
Based on your description of your room and system, I assume you have a symmetrical room and the two subs situated near the speakers? If that's the case, then the subs probably have identical or near-identical response. Still, I'd measure each one separetly, and both together.
Sounds like you're going to need a second BFD, as it is a two-channel device and can't accept four inputs.
Regards,
Wayne
|
Hi Wayne,
Unfortunately my room is not symmetrical. There is an openning 6' on the left rear corner. I installed a solid core french door to enclosed that opening which make the room not symmetrical. The subwoofer is located about 9' from the front wall and 5' from the speakers one each side. Each sub is 1' from the side wall. Also from the front wall left side there is a 3'x3' column on front left corner which make the speakers cannot placed symmetrically in the room too. BTW, my room is 8' ceiling.
Regarding the BDF, it has both XLR and 1/4" plugs input, can I switch to XLR if I want to use my preamp for 2ch audio and switch to 1/4" plugs input if I want to use my receive for HT ?
Thanks again..