Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - Going LLT from sealed
View Single Post
Old 04-03-08, 09:05 PM   #18 (Link)
 
fireanimal
Shackster
Alias: fireanimal
User: #5003
Since: Dec 2006
Posts: 57
fireanimal is offline
Re: Going LLT from sealed


Quote:
SteveCallas wrote: View Post
No. That near field response doesn't apear to be very......good Take a new one, this time with the mic or spl meter about 4" back from the center of the driver with a folded up blanket, some pillows, or anything else thick and absorbent behind the mic/meter. You should end up with a very deliberate, smooth, predicatble FR. See attached for a close mic measurement of my ported sub to get an idea of the type of smoothness you should be getting.
Thanks, I will do that.

What do you think of using 2 of the new FI IB18 subs in a 100cu/ft enclosure?? I may use a room beside my theater and build a large enclosure....I was thinking 95-100cu.ft 12" Port 13" Long for a 12 hz tune. $200 with all that excursion might be hard to pass up.


Forum Rules Reply With Quote