[MysticalJet]

Riser construction consisted of 2X10 outer frame and 2X6 interior joists - 16" on center.




The riser was wired with 4 outlets: 2 on the side, one above the step, and one in the front. Insulation was placed under and in between the joists.



3/4" plywood was screwed down on top. Carpet tacks were installed on the edges of the top an the bottom of the sides. Carpet padding was stapled to the top and the sides.




Berber carpet remnant was purchased from Lowes, carpet stretcher rented from a local hardware store, and the carpet was installed - using crown staples under the lip.








Next up is the ceiling tiles and acoustical treatment of the walls ....