Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - DSP1124P freezes/switch doesnt work. Need help with DVD
View Single Post
Old 04-09-08, 07:56 PM   #2 (Link)
 
brucek
Shack Administrator
Platinum Supporter
Alias: brucek
User: #6
Since: Apr 2006
Posts: 4,803
brucek is online now
Re: DSP1124P freezes/switch doesnt work. Need help with DVD


Quote:
I noticed that it will run for a few secs and then freeze.
Yeah, sounds like you have a defective unit.

Be sure that you set all the two sets of 12 filters in one program (i.e. Program #4) to "OF' position.

Quote:
I was also wondering if I need to download any firmware
Firmware isn't downloadable for the 1124. Any change is done by changing the PROM itself. The only firmware problems with the 1124 is in V1.3 where the midi is defective (check your version from the front panel). If you intend to not use the midi, there's no reason to upgrade.

Quote:
Well I did try the software but I was not successfull
I'd give REW a real effort. It's significantly better than tones and measure method.

Quote:
as I get the hum only if I
hook up my PC.
Yeah, PC's are horrible for hum. I admit to using a cheater plug for REW PC hookups when using a PC. It's not safe, but it's only when I run REW and then I remove the cheater. I use the cheater on the PC and monitor AC cord.

Quote:
which DVD has the frequency sweep
If you're truly intent on using a manual method, go to our download page and get the Excel file for your meter and the test tones from there.

brucek


Forum Rules Reply With Quote