Thanks for the reply,
Quote:
|
It's also concerning that the signal drops off so rapidly above 10K
|
Yes, got a feeling that could be the mic to be honest, (so much for their frequency chart) i will buy the ECM and try, cause i'm hoping it isn't the monitors as they are expensive, and "supposadly" Mastering Grade! Though they do have high / low Trims on them so i should prolly try that aswell.
Quote:
|
I don't know if you've treated your studio area much, but I would say not considering the amount of reflections you showed in the unsmoothed plot?
|
None at all at present, apart from the vocal recording area, which obviously doesnt apply tho the mix sweet spot. I didn't really want to go buying/building wall panels and bass traps, untill i knew exactly what problems i was dealing with, and with much thanks to this program and your much needed knowledge and guidance, i'm starting to see the bigger picture!
A point on the unsmoothed plot....... if my room was treated, (the right way) would i not need to apply the 1/3 octave smoothing?
Would i just play this as a wav file through my monitors and press the RED button in the bottom right corner of the Spectrum Tab window?
Quote:
|
Again, I'm not a studio guy
|
Maybe not, but but you've given me such an insight as to where i need to be heading with this, so thanks
Also before, i make a post in the Acoustics section, can i post a L/R and Stereo Graph of the measurements taken with a ECM (which will probably be tomorrow now as the shops have closed here
) just so i can have a professional opion on the problem areas!
Cheers