Quote:
|
I am below 17 m/s until under 20Hz. My peak is probably right around 22 m/s. Is this a major risk for port noise?
|
No.
Quote:
|
Inside I have 4 to 5 inches of clearance above the port, both the driver and ports will be down firing and roughly 4" off the floor. Do these clearance seem adequate?
|
Inside yes, outside, not sure. If the sub is prism shaped to fit tight into a corner, then the sound wave can only radiate from the front of the sub. Here is a diagram from Collo to make sure the area is big enough. Post #10.
http://www.hometheatershack.com/foru...html#post65272