Quote:
brucek wrote:
 REW sends the same signal out the right and left line-out (when you don't use Left Channel Calibrate). Many people simply use the right channel output from the PC and then split it with a Y-splitter into the receiver so they can check both mains speakers. |
So, if I had both outputs from the PC sent to the mains, and my mains disconnected so all the info was going to the sub, I would be sending 2 signals to the sub (or doubling it up), right? To fix that I should disconnect the left channel and split the right before it gets to the receiver input.
Quote:
You have the option of not using the soundcard cal file, and using the left channel looped back from line-out to line-in. See the REW HELP FILES.......
brucek
|
I'm using the soundcard cal file, so I guess I don't need to do that.