[deadzone]

Ok using a digital multimeter, all of the 1.8 ohm resistors tested around 1.9-2.1, except for one that was around 2.5. The 220 ohm resistors tested around 219-223. I know that sometimes resistors on a PCB will test a slightly different resistance than if they weren't on a board, but are they ok? I know they're slightly outside the 5% range, and resistors are cheap, so should I just replace all of them to eliminate that factor?

Thanks again for all the help, I really don't want this TV to turn into a 200lb doorstop.

-Geoff