| Re: Is this curve normal, or do I have setup problems?
Looks OK. I would use a sweep level of -12dB. Set the wave level to 1.000 and the output volume to 0.5000
It would be a good idea to determine if the line-in jack is stereo or mono. This of course determines the connector type used at that port. You can't interchange those connector types.
If you use the soundcard calibration file method, you need to load the saved file into REW. I see it's not loaded in your picture above (that may simply be a matter of when you took the pic).
BTW, the standard vertical axis is 45dB-105dB.
brucek
|