Quote:
Anthony wrote:
 Ah, found something on the Westhost site: http://sound.westhost.com/pots.htm
1 is ground, 2 is wiper, and 3 is source. Good diagram lower on the page with a view to ID 1,2, and 3.
Hope this helps. |
Heh, I posted a link to that page in my second post, but I was only really looking at the pictures. =P
I'm just not sure how to set up the diagram I posted. Red to the in, then red out to the amp, and the resistor and capacitor from the "lower" arm going to the black wire? ( ground )
I just want to make sure I'm seeing this right.