Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - Should I or should I not move from a 10" to an 18" ?
Thread: Should I or should I not move from a 10" to an 18" ?
View Single Post
Old 05-05-08, 03:28 AM   #17 (Link)
 
SQBubble
Senior Shackster
Alias: SQBubble
Loc: MTL, QC, CA
User: #13347
Since: Nov 2007
Posts: 110
SQBubble is offline
Re: Should I or should I not move from a 10" to an 18" ?

I got all the enclosure dimensions and tuning ready to be built(~7.8NET @~17.65hz), but I got a tricky question I gotta get that answered before I proceed!!

ok so the sub will be firing on the floor, and the 2 PR's are going to be firing same side one on top of the other one, kind of an L, where the | are where the PRs are and _ is where the sub will be, logically, the PR in the middle of the sub and the other PR will be getting most of the pressure produced by the 18" sub... Will this be an issue?

Any thoughts?

Samsung 24" LCD Widescreen 245BW
X-Fi Elite Pro Soundcard
B&W 685
AA hAvoc 18" with 2 PR1816 in 7.3cu.ft@18.5hz
Crown XTi1000
Crown XTi2000
the big summer upgrade(new big sized bookshelves with new sub setup)
**Soon to be a new MTM DIY project**
Forum Rules Reply With Quote