Home Theater Systems - Electronics and Forum - HomeTheaterShack - View Single Post - Behringer FBQ2496 manual adjustment with RTA
View Single Post
Old 05-09-08, 10:45 AM   #26 (Link)
 
Andysu
Shackster
Alias: andy summers
Loc: United Kingdom
Andysu's Avatar
User: #20513
Since: May 2008
Posts: 28
Andysu is offline
Re: Behringer FBQ2496 manual adjustment with RTA


I’ve done another frequency sweep test at 10feet distance to the listening position. Microphone is (point at the front) of the room.

So what does those (level -19db ok) mean? I assume the level is correct or near to being correct as I have had ones that said (level is low).



Headroom I assume that means I have a good clear level before clipping and my amplifier Alesis RA300 is no where near clipping, unless I’m getting some false readings here?



I’ve unplugged the ports and done the test over again. I would like to get this done right. But I having a little misdoubt with my conference with this device at the moment. Maybe you can delay me of these negative vibes I’m getting, or it could be that the, heat is getting to me, it’s rather warm today.

Thanks.



Life is now slightly better now that I have partly EQ the sub with REW.

Forum Rules Reply With Quote