[sandman01244]

I have a problem with my Infocus IN76 projector not seeing any signal sent to it via HDMI. Initially I had the projector hooked up to a PS3 directly via HDMI and had no problems. I have just purchased the new Onkyo 606 amp however, so instead of the HDMI connection going directly to the projector it now passes through the amp. This is where the problems began! With this set up I was getting no signal through to the projector. Thinking the amp was to blame I went back to the original configuration of the PS3 connected directly to the projector and to my suprise I still obtained no signal. When HDMI is selected the screen goes black for a minute before returning to the red Infocus start up screen. I have tried all the possible resets on the PS3 and used a number of different HDMI cables but I still get no picture. The projector is still working fine via the component imputs!
Please help before I pull all my hair out!!!!