Quote:
Lobotomy^ wrote:
 I recommend making all the measurements with one speaker at the time. |
That makes sense - I will try it. However, I did spend quite a bit of time testing the FR of the room with the sub phase control at a bunch of different positions. I settled on the smoothest curve, so I think I'm getting minimal phase issues.
I am going to have to redo my measurements. I didn't really get a great before / after because the mic was not in the exactly same position when I did my after measurements this weekend. I will go ahead and move the traps out of the way and try all of this again this week and post my results.
I'm not going to post the current before / afters (due to the test not being completely valid), but if it is valid I'm unimpressed. The curve looks almost identical from 15-150hz (my after measurements only went up that far). I need to redo it, but so far I'm a little worried my efforts were somewhat in vein, at least in the lower frequencies that I was trying to attack.
More on this later.
Jeff