Here is the Mic/meter tab...
here is the soundcard tab
So far Im stumped on how to calibrate...I have the left main speaker out connect to the left line in to do the loop testing (although I can not tell left and right when looking at the 1/8" plug y-splitter that splits into 2 RCA connections.
Here is what I get when I start measuring....
Here is what I get when I start the sound card calibration, I can not get even close to a 3 dB differential?????
Its all very confusing but it doesnt seem that Im doing this correctly. I do get a signal on the left channel, not shown in the last pic, its gets up too -14 which is green but the message still says my DB is too low...is it thinking I need the right channel?
Maybe its a Right and left thing ? I did switch input channel to Left and clicked "OFF" the use Left channel. I get a better headroom of 19dB but there is still a message talking about 10 dB.
I guess my questions are....
What did I do wrong?