[whoaru99]

Just finished hooking up and trying the soundcard calibration routine for the Tascam US-144 USB interface.

Just want to check that these values seem to be correct and of proper quality.

Sample rate: 48000Hz
-3dB points: 2.6Hz, 22.983kHz
Input device: TASCAM US-144
Input: No input selected
Channel: Right
Input volume: no control
Input RMS target: -15.0dB
Actual RMS at 1kHz: -35.6dB
Output device: TASCAM US-144
Output: No output selected
Sweep level: -15.0dB
20Hz .. 20kHz flatness: +0.0, -0.2dB

Also, how do I interpret the impulse response graph to know whether it's good or not?


Thanks!!