[pearldivers]

Hello from a newbie,

I've downloaded the REW and installed the Java update.

I have two cards, a Delta 1010 and an Echo MiaMIDI, neither of which I can calibrate.

I've tried looping Left to Left, then Right to Right on both cards, ensured monitoring is off and adjusted levels so that out is same as in.

I have triple-checked my computer for default in/out of the audio for each test on each card.

However, no matter what settings I use on the cards, from minimum fader to maximum fader levels or anything in between, the "measure" dialogue box always tells me the reading is -71dB and that I need to readjust the cards. The graphs of the responses that are generated are just a few blocked lines on the right end, not a response curve.

So...after half a day of failure, I'm stuck and have no idea what to do next.

Any tips?

Oh, my computer is a Mac G4.

Regards,

Jet