Recommended one box sollution for sub rumble filter and EQ?

**Parts** · **07-12-09, 10:26 AM**

Hi all

,

I am wondering what one box sollutions are available which can be installed between the Sub RCA out of an AV processor and a power amp? I would like a one box sollution for the rumble filter and any other settings that may prove usefull including maybe EQ?

I am on a budget, this month I am building one of a pair of subs each of which will be around 500L port tuned to 20hz and requiring a HPF around 17hz to 19hz. Each sub will contain two JBL GTO 1502D drivers.

I intend to buy a Behringer EP4000 amp next month for these, but would like to look at what other electronics are required first.

Any suggestions? (which must be available in the UK)

Cheers,
Steve

**brucek** · **07-12-09, 12:22 PM**

About the only one I know of (that works) is the Elemental Designs eQ.2.

brucek

**Parts** · **07-12-09, 02:10 PM**

What is the power input requirement? and do you need a PC for tuning and set up?

Are any of the Behringer units suited?

**brucek** · **07-12-09, 02:52 PM**

Quote:

What is the power input requirement?

This isn't a power device. It receives line-level from your receivers sub-out jack.

Quote:

do you need a PC for tuning and set up?

You would need to run REW to aid in setting the subsonic filter and any EQ you dialed into it.

Quote:

Are any of the Behringer units suited?

Not that I know of.

brucek

**Mike P.** · **07-12-09, 02:52 PM**

You'll need to contact E.D. to see if it's 110/220 volt.

**Ricci** · **07-13-09, 11:53 AM**

What about the Behringer Mic2200?

**Wayne A. Pflughaupt** · **07-19-09, 12:58 AM**

Should work, if you can live with a single filter and a HPF with only 12 db/octave. Daisy-chaining the two channels would give two filters and a 24 dB/octave HP, providing you can precisely align the frequency settings.

Regards,
Wayne

Advertisement