Another 10" CSS build

**Rodny Alvarez** · **06-10-09, 02:05 PM**

Thank´s!!!!!!!

**Lotusman** · **06-18-09, 02:37 AM**

Simply put ,, a work of audio art ! Outstanding craftsmanship. I was wondering what type of fasteners did you use if any because I could not see them. Or did you use glue only ? Also did not no Bondo could be used on wood.

Thx
Lotusman

**Rodny Alvarez** · **06-18-09, 09:03 AM**

Quote:

Lotusman wrote:

Simply put ,, a work of audio art ! Outstanding craftsmanship. I was wondering what type of fasteners did you use if any because I could not see them. Or did you use glue only ? Also did not no Bondo could be used on wood.

Thx
Lotusman

thanks!

1 1/2 by 1/4" crown staples and wood glue and yes u can use bondo on wood.

**pete in atlanta** · **07-17-09, 11:29 PM**

Quote:

Rodny Alvarez wrote:

More progress.....

Flush the amp

Attachment 13235

How did you go about doing this Rodny?
It doesn't look like you could have used a a rabbeting bit with the right size bearing since the corner radius is so small.

Talk slow and use small words- I new to this

**Rodny Alvarez** · **07-20-09, 10:32 PM**

Quote:

pete in atlanta wrote:

How did you go about doing this Rodny?
It doesn't look like you could have used a a rabbeting bit with the right size bearing since the corner radius is so small.

Talk slow and use small words- I new to this

Hey Pete!!

sorry for the delay

I used 4" wide pieces of wood to make a guide for the trimer and I used a Straight Router bit, you can use double side tape to attach the strips of wood to the box, just like I did on the grill

**pete in atlanta** · **07-22-09, 12:43 PM**

Thanks for the reply Rodny. You are a master with that router.

**favelle** · **09-11-09, 01:33 AM**

Holy moly, what a FINISH on that bad-boy!

**Rodny Alvarez** · **09-12-09, 11:57 AM**

Quote:

favelle wrote:

Holy moly, what a FINISH on that bad-boy!

Thanks!!!

**Drizt** · **11-06-09, 03:39 AM**

Holy !

This is one of the best DIY jobbies I have ever seen.

What a legend, great work.

**Rodny Alvarez** · **11-07-09, 09:49 AM**

Quote:

Drizt wrote:

Holy !

This is one of the best DIY jobbies I have ever seen.

What a legend, great work.

Thanks Dritz!!!!

**Exocer** · **11-16-09, 09:16 AM**

Excellent work! I love the overall look...the port is awesome, so are the rounded edges. Congratulation on a job well done. I can imagine how great it sounds with that frequency resonse.

I've been thinking about going with a smaller ported sub to replace my sealed 15" sub. When are they comming out with an SDX 12?

**Mike P.** · **11-16-09, 10:09 AM**

The SDX12 has been put on hold for the time being.

**Guiria** · **11-18-09, 11:01 PM**

Hands down the best piano black finish I have seen on a DIY project. At first I was just going to glance at this thread but your build pictures drew me in and here I am at the end of the thread in awe.

If you can take the time to share the finishing process that would be great. If not, no hard feelings. I probably wouldn't do it, that would make a really long post

Nice work.

Advertisement