I wasnt quite sure what the phase is doing between the tweeter annd the woofer. Thats why u ran some simulations. Crossover frequency is 1.9kHz.
Obove is tweeter air motion transformer AMT, thats why purely resistive.
Below is the woofer, having 0,7mH inductance and 5.8 Ohm active reistance.
I reversed the polarity of the Oscilloscope and voilla, channels are in phase.
The thing is when i meassure the current through the R (which is voice coil dc resistance) i get the follwing. What should i do, any ideas? Thanks
The reversed Osci, shows no phase difference when woofer (or tweeter for that matter) is reversed:
Obove is tweeter air motion transformer AMT, thats why purely resistive.
Below is the woofer, having 0,7mH inductance and 5.8 Ohm active reistance.
I reversed the polarity of the Oscilloscope and voilla, channels are in phase.
The thing is when i meassure the current through the R (which is voice coil dc resistance) i get the follwing. What should i do, any ideas? Thanks
The reversed Osci, shows no phase difference when woofer (or tweeter for that matter) is reversed: