Home Theater Forum and Systems banner

Piano Black Laquer

5K views 9 replies 5 participants last post by  Geoff St. Germain 
#1 ·
Can someone point me at materials and instructions for how to apply a piano black laquer to MDF? I'd like to make the end caps and base stand piano black, if not too difficult. The alternative is a matte black like SVS subs.
 
#3 ·
Thanks!
 
#10 ·
The two mids are Tang Bands (W4-657SB), the tweeter is a Dayton DC25TS-8 and the woofer, which is horn loaded, is an 8" Tang Band W8-740C. The woofer is low-passed at 100 Hz, but the bandpass for the mids starts at 200 Hz. This is because of the rising response of the horn. I can't recall what the mid/tweet crossover point is. The design is from www.billfitzmaurice.com. I'll probably have to tweak the crossover a bit once I get them up and running since the MTM section is different than in the original design.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top