I've been cobbling a theater together as cheaply as possible. It's about 13'x26' with 9' ceilings. There are two rows, one at 11 ft and one at 16 ft.
You can see it at AVS Forum thread 1116618
I've been searching for killer deals on a decent 12" or 15" driver and picked up a clearance Rythmik DS12 non-servo with a cosmetic blemish for $80. To go with it, I ordered an OAudio 300W BASH amp.
I was hoping to go LLT with it but can't get that to work without exceeding Xmax.
How does this design look? I attached the WinISD driver parameters file and the design file.
I am thinking of a 4 cu. ft. box with a 4" port tuned to 16 hz. I used a high pass filter to model the subsonic filter shown in the amp owners manual.
I'd appreciate any feedback you can give me.
Thanks in advance,
Eric
You can see it at AVS Forum thread 1116618
I've been searching for killer deals on a decent 12" or 15" driver and picked up a clearance Rythmik DS12 non-servo with a cosmetic blemish for $80. To go with it, I ordered an OAudio 300W BASH amp.
I was hoping to go LLT with it but can't get that to work without exceeding Xmax.
How does this design look? I attached the WinISD driver parameters file and the design file.
I am thinking of a 4 cu. ft. box with a 4" port tuned to 16 hz. I used a high pass filter to model the subsonic filter shown in the amp owners manual.
I'd appreciate any feedback you can give me.
Thanks in advance,
Eric