10" Rockford Fosgate

[overlord1330]

I have a 10 in Rockford fosgate power sub I want to run in my home ht i don't have all the specs on it how do I model a box for it my equipment is pioneer elite receiver 4 crown xls 1000 1 crown xls 2000 for the sub

[Mike P.]

Please use proper punctuation when posting, it makes it much easier for us to read.

What is the model number of the subwoofer? If we can find the parameters we need to model it we should be able to figure something out for you.

[overlord1330]

I kinda can't I never learned how sorry

[tshifrin]

I usually model my speakers by loading the T/S parameters into WinISD or a similar program. So if you can tell us the model number of the sub driver, we may be able to find it on the web, and help you model your sub for home use.

Tom

[overlord1330]

http://www.rockfordfosgate.com/rftec...-T112D4-TS.pdf

[Mike P.]

Which driver do you have, the dual 2 ohm or the dual 4 ohm?

Also your first post says 10" and the parameters you linked to are for the 12".

[overlord1330]

it is dual 4 and it is the 10@sorry

[Mike P.]

For home theater it models to 2.5 cu.ft. tuned to 23 hz. You will need 300 watts at 8 ohms with a subsonic filter at 20 hz. Due to the port air speed it will need a 4" flared port 23" long.

[overlord1330]

Thank so much guys.