Looking to find a box plan for a 6ish cuft ported box prefer slot slot load.

**tundraSQ** · **10-26-08, 08:52 AM**

This is for my TC2000 15" driver. I have built a LLT which i loved but the wife didn't. So in a moment of weakness i switched to a small sealed box and i don't like it nearly as much.

I thought I would try a mid sized ported box and hopefully be done. Has anyone had good luck around 6-8 cut foot?

thanks!!!

**Ricci** · **10-26-08, 02:15 PM**

Look at the NeoDan endtable designs. I'm not sure if there is a 15" version yet, but it could easily be adapted. It's a medium size 6-9cu ft but with a very big slot port for a low tune.

http://www.hometheatershack.com/foru...m-x-build.html

**Mike P.** · **10-26-08, 03:09 PM**

Here's one that is 6 cu.ft. internal. The plans could be adjusted to make it 6 cu.ft. net or bigger.

http://www.hometheatershack.com/foru...idq-plans.html

**mjbuoni** · **10-26-08, 09:55 PM**

Hi Tim, we're in a similar position it seems. I have a pair of Audiopulse Revo 15's that I'm trying to decide on enclosures for. I actually would prefer LLT but I'm but sure of a couple of things. First, did you have your TC 2000 down-firing or front-firing? I've read and been told that it's best to front-fire these drivers but I'm not sure if that's true. Next, I'm wondering the shape of the enclosure you used. I have 6" aeroports that I'm using and I'm not sure if it's best to fire the port up if the driver is down-firing, for example. Seems like higher frequencies would escape from the port as well if the opening faces the back of the driver. What about wall damping material - did you use any and does it make a big difference? I'm thinking of about 11 ft^3 tuned to around 15 Hz.

Just a thought with regard to your mid-size enclosure build. Maybe something like the MFW-15 from AV123. Those aren't too big and are tuned to around 16 Hz, according to Mark Shifter (I actually spoke with him personally!) Plus, it's a proven design...

**tundraSQ** · **10-27-08, 06:17 AM**

Quote:

mjbuoni wrote:

Hi Tim, we're in a similar position it seems. I have a pair of Audiopulse Revo 15's that I'm trying to decide on enclosures for. I actually would prefer LLT but I'm but sure of a couple of things. First, did you have your TC 2000 down-firing or front-firing? I've read and been told that it's best to front-fire these drivers but I'm not sure if that's true. Next, I'm wondering the shape of the enclosure you used. I have 6" aeroports that I'm using and I'm not sure if it's best to fire the port up if the driver is down-firing, for example. Seems like higher frequencies would escape from the port as well if the opening faces the back of the driver. What about wall damping material - did you use any and does it make a big difference? I'm thinking of about 11 ft^3 tuned to around 15 Hz.

Just a thought with regard to your mid-size enclosure build. Maybe something like the MFW-15 from AV123. Those aren't too big and are tuned to around 16 Hz, according to Mark Shifter (I actually spoke with him personally!) Plus, it's a proven design...

http://www.avsforum.com/avs-vb/attac...7&d=1206657451

Advertisement