Subwoofer Database Addition Suggestions and Discussion Thread

[Sonnie]

Mike P. had created a Subwoofer Database thread so that it will easier to locate threads here at Home Theater Shack that reference the various DIY Subwoofer build projects.

This thread here will be for submitting additions to that thread and will also serve as the discussion thread for the database thread. This will keep the database thread clean and organized.

If you would like to submit a suggestion, include the following:

• Driver brand, model number and size.
• Enclosure volume in liters and cubic feet.
• Tuning frequency.
• Link to your build thread (at Home Theater Shack only).

Your suggestions will be reviewed and added to the database as soon as possible.

Thanks!

[BoomieMCT]

Here is a bunch of Dayton builds;

Sub Puppies: Dayton 12" Titanic Mark III, 45 L (1.6 cubic feet) sealed, 33.8Hz box tune

Dipole Sub, Dual Dayton Clearance 12" drivers (works well with Elemental Designs EHQS-12s too), n/a, n/a

Budget Stubby Sonosub, Dayton SD315-88 12" SHIELDED DVC, 127 L (4.5 cubic feet), 26.5 Hz box tune

[Geoff St. Germain]

CSS:

Dual Ported SDX-15: 420 L tuned to 16 Hz with 3" x 23" slot port.

[avaserfi]

There is my 12" Infinity Kappa VQ build which was done because of how well the driver measured in Ikka's testing.

[Mike P.]

avaserfi wrote:

There is my 12" Infinity Kappa VQ build which was done because of how well the driver measured in Ikka's testing.

Is "Kappa 12VQ" the proper name for the sub?

[vinculum]

GREAT Idea. I dont know how many times I've tried to relocate something I've seen in the past!

[avaserfi]

Mike P. wrote:

Is "Kappa 12VQ" the proper name for the sub?

I think it would be "Infinity Kappa Perfect 12 VQ." I could also change the title to reflect the fact that I used the MidQ insert as two completely different subs could be made using low or high Q modes.

[Mike P.]

avaserfi wrote:

I think it would be "." I could also change the title to reflect the fact that I used the MidQ insert as two completely different subs could be made using low or high Q modes.

Thanks Andrew. I changed the database name to Infinity Kappa Perfect 12 VQ.

[BoomieMCT]

Forgot this one;

8" Transmission Line Sub, Dayton SD215-88 8" Shielded DVC Subwoofer, Length = 90 inches, Sdo = 34 in^2, tuned to 33 Hz.

[Mike P.]

Thanks Boom.

[thxgoon]

Here's my TC1000 Build.

15", 400L, 15hz

[Mike P.]

thxgoon wrote:

Here's my TC1000 Build.

15", 400L, 15hz

Thanks. Build added.

[Mike P.]

As far as I can tell I've completed the database. If I missed anyone please post a link here and it will be added. Thanks.

[BoomieMCT]

Mike P. wrote:

As far as I can tell I've completed the database. If I missed anyone please post a link here and it will be added. Thanks.

Looks good. Now someone should make a speaker database <puts finger on nose and says "not it">!

[Mike P.]

I'll be adding the names of the builders to their related builds in the database. It should make it easier for members to find a specific build.

[hddummy]

Love the Database thread....thanks!!!

[atledreier]

Is this for finished projects only?
If so, how about an 'ongoing builds' thread at least? The finished projects often have information that is obsolete. Ongoing projects tend to be 'fresher'...

[Mike P.]

I'm not sure what you mean by 'ongoing builds'. Can you give an example?

[atledreier]

Builds that are not yet complete, as in 'ongoing'. They are often 'fresher', any prices, suppliers and solutions are often of a newer date than completed builds in which information can be years old.

One example is my build

[Mike P.]

Ok, I see what you mean. The intention of the database is to give people an idea as to what