tc 4000 box help

[tc3k101]

hi everyone i havent been on the shack in a while.

but i have a tc sounds lms 4000 that im gonna use for hometheater. well ive tried using my winsid and its not working right. so can someone help me some up with a box for my room ill get dimension in a lil. but all i have to work with is a dayton rack amp from p/e. its roughly 1000rms@4ohms. tsp follow notice how low the fs is

15" LMS-4000 SVC

Qts 0.496
Qes 0.547
Qms 5.305
Fs 14hz
Res 2.77Ω
Ls 0.85mH
Lp 2.98mH
Rp 1.69Ω
Dia 329mm
Vas 422l
mms 2721g
cms 416um/N
bl 11.1T*m
Spl 85.6dB

[tc3k101]

so no one on the forum can help me model a box out? cmon i know someone has expierence with this sub

[Mike P.]

So far I have it modelled to 10 cubic feet sealed. If you could post what the Xmax is would help take this further.

[tc3k101]

kk my bad on xmax though i had it on guess not i have it in 5cb sealed and dont like it.
yeah the wev archive isnt working i cant get the xmax

[Mike P.]

Found this though:
http://www.hometheatershack.com/foru...ms-4000-a.html

13 cubic foot tuned to 16hz was recommended by Nathan. That would be a fairly large cabinet.

[tc3k101]

hahaha thanks. same exaxt setup huh got the lms and getting amp comes next week got it from him

[Mike P.]

You should send Nathan an email. He would know what the Xmax is.

[tc3k101]

sorry but idk who nathan is not really a regular on the shack. since im selling my old equipment besides the lms and waiting till my garage is finished to get a new one

[Ricci]

Nathan runs FunkyWaves Audio. I believe that the xmax on those was 30mm.

[tc3k101]

yeah xmax is 30mm and i will pm mr funk

[Jason Schultz]

Is the Fs really a low LOW 14hZ !

[ringbearer3791]

I've got a 12" lms4000, the xmax is 30mm.