Discuss DCX2496 and 4 Subs in the Equalization | Calibration forum.
At any rate I don't like how Audyssey started chopping away from 50Hz down. I think I am going to ...

**counsil** · **07-09-11, 11:19 PM**

At any rate I don't like how Audyssey started chopping away from 50Hz down. I think I am going to go into Audyssey Pro and apply a 1dB gain from 40-50Hz, a 2dB gain from 35-40Hz, and a 3dB gain from 35Hz down.

**jtalden** · **07-10-11, 10:34 AM**

It looks very good to me. The XO handoff looks fine. Tuning to taste.

**zacjones** · **12-10-11, 03:05 PM**

Great thread, thanks for sharing your project with us!

Thanks to this thread, I'm also now considering a similar install with 4 dual driver IB manifolds, a DCX2496, and the 4311. I already have the DCX and the subs, and was already leaning towards the 4311 for processing and the XT32. My main concern was trying to get the XT32 working properly on more than two subs. Seems like my DCX could be put to good use! I had been thinking I would be limited to two 4-driver IB manifolds, which is proving problematic, installation-wise, but now it seems I have more options!

Any updates?